Site icon DesignLinux

LFCA: Learn Basic Linux System Commands – Part 3

This article is Part 3 of the LFCA series, here in this part, we will list 24 of the most widely used Linux system administration commands that are required for the LFCA certification exam.

Linux system provides a vast pool of commands that you can use to administer and manage your system and they are as follows.

1. uptime Command

The uptime command displays how long your system has been running since the last time it was turned on. Without any arguments, it displays a host of information such as the time the system has been running, users with running sessions, and load average.

$ uptime

11:14:58 up  1:54,  1 user,  load average: 0.82, 1.60, 1.56

To get the exact date and time since the system was turned on, use the -s flag.

$ uptime -s

2021-03-17 09:20:02

To get the exact duration in a more user-friendly format append the -p flag.

$ uptime -p

up 1 hour, 55 minutes

The output below shows that the system has been up for 1 hour, 55 minutes.

2. uname Command

The uname command prints out basic information regarding your operating system and underlying hardware. Without any arguments, the uname command only prints out the operating system – which in this case is Linux.

$ uname

Linux

Append the -a flag to reveal all the information such as the kernel name, version, release, machine, processor, and operating system.

$ uname -a

Linux ubuntu 5.4.0-65-generic #73-Ubuntu SMP Mon Jan 18 17:25:17 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux

To display the kernel release append the -r flag.

$ uname -r

5.4.0-65-generic

To get the kernel version use the -v flag.

$ uname -v

#50~20.04.1-Ubuntu SMP Mon Jan 18 17:25:17 UTC 2021

To see the type of kernel you are using, use the -s flag.

$ uname -s

Linux

For more commands, check the help section as follows.

$ uname --help

3. whoami Command

The whoami command displays the currently logged-in user as shown below.

$ whoami

tecmint

4. w Command

The w command provides information about currently logged-in users.

$ w

11:24:37 up  2:04,  1 user,  load average: 2.04, 1.95, 1.74
USER     TTY      FROM             [email protected]   IDLE   JCPU   PCPU WHAT
tecmint  tty7     :0               09:21    2:04m  7:52   0.52s xfce4-session

5. free Command

The free command gives information about the swap and main memory’s usage. It displays the total size, used up and available memory

$ free

              total        used        free      shared  buff/cache   available
Mem:        8041516     2806424     1918232      988216     3316860     3940216
Swap:      11534332           0    11534332

To display information in a more human-readable format, append the -h flag.

$ free -h

              total        used        free      shared  buff/cache   available
Mem:          7.7Gi       2.7Gi       1.9Gi       954Mi       3.2Gi       3.8Gi
Swap:          10Gi          0B        10Gi

6. top Command

This is among the useful tools in a Linux system. The top command gives a glimpse of the currently running processes and also provides a real-time overview of the system resource usage.

At the very top of the output, you get information about the uptime, running tasks, CPU, and memory usage.

$ top
Linux Resource Usage Summary

Let’s briefly break down what each column represents.

To display processes specific to one user, run the command

$ top -u tecmint
Check Linux User Resource Usage

7. ps Command

The ps command lists the currently running process on the current shell alongside their PIDs.

$ ps

   PID TTY          TIME CMD
  10994 pts/0    00:00:00 bash
  12858 pts/0    00:00:00 ps

To display currently running process of user, use the -u option as shown.

$ ps -u tecmint
Check Linux User Running Processes

8. sudo Command

A portmanteau for Super User do, sudo is a command-line utility that grants a regular user ability to perform administrative or elevated tasks. Before using the command, ensure that the user is first added to the sudo group. Once added, begin the command with sudo first.

For example, to update the package lists, run the command:

$ sudo apt update

You will be prompted for the password upon which the task will be executed.

Update Ubuntu Using Sudo User

9. echo Command

The echo command does quite a number of things. First, it can print out the value of a string on the terminal as shown.

$ echo “Hey guys. Welcome to Linux”

“Hey guys. Welcome to Linux”

You can also save a string to a file using the ( > ) redirection operator. If the file does not exist, it will be created.

$ echo “Hey guys. Welcome to Linux” > file1.txt
$ cat file1.txt

“Hey guys. Welcome to Linux”

Kindly note that this overwrites a file. To add or append information use the double greater than operator ( >> ).

$ echo “We hope you will enjoy the ride” >> file1.txt
$ cat file1.txt

“Hey guys. Welcome to Linux”
We hope you will enjoy the ride

Additionally, an echo command can be used to display environment variables. For example, to display the currently logged in user run:

$ echo $USER

tecmint

To display path to the home directory run:

$ echo $HOME

/home/tecmint

10. history Command

As the name suggests, the history command gives you a history of the commands that were last executed on the terminal.

$ history
View Previously Executed Commands

11. head Command

Sometimes, you might want to have a peek at the first few lines of a text file instead of viewing the entire file. A head command is a command-line tool that displays the first few lines in a file. By default, it displayed the first 10 lines.

$ head /etc/ssh/ssh_config
View Lines in Text File

You can pass the -n flag to specify the number of lines to be displayed. For example, to display 5 lines run the command as follows:

$ head -n 5 /etc/ssh/ssh_config

12. tail Command

The tail command is the exact opposite of the head command. It displays the last 10 lines of a file.

$ tail /etc/ssh/ssh_config
View Last Lines in Text File

Just like the head command, you can define the number of lines to be displayed. For example, to view the last 5 lines of a file, run:

$ tail -n 5 /etc/ssh/ssh_config

13. wget Command

The wget command is a command-line tool used for downloading files over the web. It supports multiple functionalities including downloading multiple files, limiting download bandwidth, downloading in the background and so much more.

In its basic form, it downloads a file from a given URL. In the command below, we are downloading the latest Linux kernel.

$ wget https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.11.4.tar.xz

The command begins by first resolving the IP address of the URL, upon which it connects to the remote servers, and begins to download the file. The file is downloaded to the current directory.

Wget Download File in Linux

To save a file to a different directory, use the -P flag followed by the path to the directory followed by the URL. For example, to download a file to the /opt directory, run the command.

$ wget -P /opt https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.11.4.tar.xz

To download and save a file under a different name, use the -O flag followed by the desired file name.

$ wget -O latest.tar.xz https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.11.4.tar.xz

14. finger Command

The finger command gives some brief information about the login user including the name, shell, home directory, and the time since the user has logged in.

$ finger tecmint

Login: tecmint        			Name: Tecmint
Directory: /home/tecmint            	Shell: /bin/bash
On since Wed Mar 17 09:21 (IST) on tty7 from :0
   2 hours 52 minutes idle
No mail.
No Plan.

15. alias Command

The alias command allows you to assign your own name to a Linux command for purposes of convenience. For example to assign an alias called show to the command ls -a, run the alias command as shown.

$ alias show=ls -a
$ show
Create Alias in Linux

16. passwd Command

The passwd command allows you to change your password. Simply run the passwd command as shown.

$ passed

You will be prompted for your current password, upon which you will provide a new password and later confirm it.

Change User Password

Additionally, you can change the password for another user simply by passing the username of the user as an argument.

$ passwd username

17. groups Command

To check which groups a user belongs to run the groups command as follows:

$ groups
OR
$ groups tecmint

tecmint sudo

18. du Command

Want to keep an eye on the disk usage of your files and folders? The du command – short for disk usage – is the standard command for checking disk usage of files and directories.

The command follows a basic syntax as shown.

$  du OPTIONS FILE

For example, to view the disk usage in a human-readable in your current directory, execute the command:

$ du -h .

To check the disk usage in another directory, for example /var/log/ run the command:

$ du -h /var/log
Check Linux Disk Usage

19. df Command

The df command – short for disk free – checks the total disk space, space being used and the available disk space in various file systems. It takes the syntax shown below:

$ df OPTIONS FILE

The most crucial options are -T and -h. The -T flag prints the file system type whilst the -h flag displays the output in a human-readable format.

The command below lists the free disk space in all the filesystems.

$ df -Th
Check Linux Filesystem Disk Usage

20. chown Command

The chown command is used for altering the user and group ownership of files and directories. When you list the contents of a directory using the ls -l command, you will get an output similar to what we have here.

$ ls -l
List Files in Linux

In columns 3 and 4, you can clearly see tecmint tecmint. The first of these points to the user and the second entry refers to the group, which is also tecmint. When a new user is created, they are assigned a new default group, of which they are the only member by default. This is an indicator that the file(s) or directories are not shared with anyone.

Using the chown command, you can change the file ownership quite easily. Simply provide the name of the owner followed by the group name, separated by a full colon ( : ) This is an elevated task and you will have to invoke the sudo command.

For example, to change the group of the file1.txt to james but retain the owner as tecmint run:

$ sudo chown tecmint:james  file1.txt
$ ls -l
Change File Ownership

To change both the owner as well as the group, run the command:

$ sudo chown james:james  file1.txt
$ ls -l
Change File Ownership in Linux

To change ownership of a directory use the -R flag for recursive. We have created a new directory called data and we shall change both the user and group to james.

$ sudo chown -R james:james data
$ ls -l
Change Directory Ownership

21. chmod Command

The chmod command is used to set or modify file or folder permissions. Back to the output of the ls -l command. The first column comprises of the following characters

drwxrwxrwx

The first character ( d ) indicates that this is a directory. A file is represented using a hyphen ( - ). The rest of the nine characters are divided into 3 sets of rwx (read, write, execute) flags. The first set represents the file owner (u), the second represents the group (g), and the last set represents all other users.

There are two ways of assigning file permissions: Numeric and symbolic (text) notation. For Numeric notation, each of the flags represents a value as shown.

r = 4

w = 2

x = 1

No permissions = 0

To get the file permissions of a file simply add the corresponding values in all the sets. For example:

drwxrwxr-x

Finally, we arrive at the notation 775.

Let’s take another example of file 1.txt.

-rw-rw-r-- 1 james  james   59 Mar 6 18:03 file1.txt

Here, we have rw-rw-r–.

Let’s add them up.

This comes to 644.

We will set this to 775. This gives the owner and group of the file all permissions – i.e rwx, and other users read and execute permissions only.

Run the command:

$ sudo chmod 775 file1.txt
Change Linux File Permissions

The other way of assigning permissions is using symbolic notation. Using the symbolic notation, the following flags are used to either add or remove permissions

For example, to remove execute permissions from all sets – owner of the file, group members, and other users, run the command

$ sudo chmod a-x file1.txt
Remove Execute File Permissions

To assign group members read permissions only and not write and execute, run.

$ sudo chmod g=r file1.txt
Assign Read Permissions

To remove write permissions from other users, run.

$ sudo chmod o-r file1.txt
Remove Write Permissions

To give the group members and other users read and write permissions, run:

$ sudo chmod og+rw file1.txt
Assign Read and Write Permissions

To assign permissions to directories, use the -R flag for setting permissions recursively.

For example:

$ sudo chmod -R 755 /var/www/html

22. The poweroff / reboot Commands

The poweroff command, as the name suggests, shuts down your system.

$ poweroff

Another command that accomplishes the same task is the shutdown command as shown.

$ shutdown -h now

The -h flag stands for a halt, implying stopping the system. The second parameter is the time option which can also be specified in minutes and hours.

The command below displays a message to all logged-in users notifying them of the system shutdown that’s scheduled in 5 minutes.

$ shutdown -h +5 “System is shutting down shortly. Please save your work.”

To reboot the system, use the reboot command as shown.

$ reboot

Alternatively, you can reboot using the shutdown command with an -r option as shown.

$ shutdown -r now

23. exit Command

The exit command closes the terminal or exits the shell. If you have initiated an SSH session, the session is closed.

$ exit

24. man Command

The man command, short for manual, displays the manual pages for any Linux command. It comes in handy when you want to see how a command is used. It gives a detailed description of the command including a brief synopsis, options, return statuses, and authors to mention a few.

For example, to view insights on the ls command, run:

$ man ls
View Linux Command Manual
Conclusion

That was a list of system commands that should help you get started in managing your system and gather various insights. As the saying goes, practice makes perfect. And it goes without saying that practicing these commands from time to time will help you get better and sharper with your system.

Exit mobile version